High-Performance Adhesive

Formoa® 017 FE

Formoa 017 FE is a single-component MS Polymer adhesive. It is designed for applications that need a high strength, flexible, and medium viscosity adhesive but with increased curing speed.

Buy Online Datasheet

Fast-curing
High Grab
High strength and durability

Overview

Formoa® 017 FE is a very high performance MS Polymer adhesive. We engineered it for semi-structural bonding where a high degree of flexibility is required. It is popular in a range of industries including Commercial Vehicle, Mass Transportation, and Marine.

Sizes Available

290ml Cartridge

600ml Foil Pack

Also available in bulk options

Colours Available

White and Grey

Applications

Ideal for applications that require a semi-structural adhesive to withstand harsh climatic conditions and increased cure speed.

Bonding dissimilar materials in particular GRP, Metals, and most Plastics
(PP, PE, and Teflon will require primer)

Bonding materials that need to pass through paint tunnels.

Key features

Quick build-up of end strength

High shear strength after full cure

High grab to help hold materials in place during cure

Does not contain isocyanates, silicone or solvents

Flexible elastic rubber

Suited for application in warm, humid climates

Colour stable and UV resistant

Can be painted when wet with most industrial paints

Withstands all climatic conditions

Minimal health and safety considerations

How to use

Application Temperature:: Between 1℃ and 30℃
(Lower temperatures will increase thickness)

Surface preparation:: Clean surface to remove grease and contamination. Then apply Formoa surface activator prior to bonding and allow 10 minutes to flash off.

Application:: Method will depend on foil pack or cartridge use. If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.

Tooling/Removal:: Use an approved soapy solution before the skin over time.

Media

Faq's

How long does Formoa 017FE take to cure?

Formoa 017FE typically takes 2-4 hours to reach handling strength and up to 72 hours to reach full strength. While Formoa adhesives and sealants are designed to cure efficiently under various conditions, high humidity can accelerate the curing process, and colder temperatures might slow it down. Always refer to the specific product datasheet for precise curing times under different conditions. Read more about what affects adhesive cure time here.

Is Formoa 017FE suitable for indoor and outdoor applications?

Absolutely. Formoa 017FE has excellent UV and weather resistance, making it ideal for both interior and exterior uses. The non-shrinking and non-yellowing properties ensure a clean and durable finish over time.

What does MS Polymer mean?

MS polymer adhesive stands for ""Modified Silane polymer adhesive."" It's a hybrid adhesive and sealant technology that combines the best features of both polyurethane (PU) and silicone sealants. MS polymer products are free from solvents, isocyanates, and acids, which makes them safe to use, environmentally friendly, and reduces the risk of shrinkage after curing.

How long is the shelf life of Formoa products?

Our Formoa adhesives and sealants typically have a shelf life of 12 months when stored in a cool, dry place. However, always check the product label or datasheet for specific details.

Can Formoa adhesives be painted over?

Yes, once fully cured, Formoa adhesives can be painted over with standard paints. It's always a good practice to test a small area first to ensure compatibility.

What does the 'FE' mean in Formoa 017FE?

The letters FE in the name originated when the original product (Formoa 017) was adjusted for applications in the Far East. Formoa 017 was too fast curing for hot and humid applications so 017FE was formulated to suit these applications. It has since become one of the most popular Formoa products.

Ready to purchase?

You can do so by purchasing directly from us or via one of our distributors